Swivel Head Innerduct Pulling Eye

Name: Swivel Head Innerduct Pulling Eye - Condux International
Availability: InStock

The Innerduct Pulling Eye is a hybrid tool that combines features from standard innerduct pulling eyes and Condux swivels. A swivel head prevents twisting and binding of the innerduct as it is installed. It eliminates the need for a separate swivel on each pulling eye when installing single innerducts into individual conduits or multiple innerducts into a single conduit. Its short length is an advantage on tight bends compared to using a separate swivel and pulling eye. Easily installed using a 13⁄8" deep socket or adjustable wrench. NOTE: To determine correct pulling eye size, obtain the actual innerduct inside diameter (I.D.). The I.D. measurement must be greater than dimension A and smaller than dimension B.

Swivel Head Innerduct diagram

Innerduct I.D. Range

Clear

Add to quote

Note: Products may be available at a lower price through authorized local distributors. Click here to find a distributor near you.

SKU: N/A Category: Innerduct Pulling Products

Innerduct Compatibility Chart

			Innerduct Eye Part No.	Innerduct I.D. Range	Compatible Innerduct
			Innerduct Eye Part No.	Innerduct I.D. Range	0.75"	1.00"	1.25"	1.50"	2.00"
		Swivel Head	08960712	1.06"-1.43" (27 mm-36 mm)	-	SDR 13.5 SDR 15.5 SDR 17 SDR 21	SDR 7 SDR 9 SDR 11 SDR 13.5	SDR 7	-
			08960715	1.37"-1.68" (35 mm-42 mm)	-	-	SDR 13.5 SDR 15.5 SDR 17 SDR 21	SDR 9 SDR 11 SDR 13.5 SDR 15.5	-
			08960720	1.93"-2.12" (49 mm-54 mm)	-	-	-	-	SDR 13.5 SDR 15.5 SDR 17
Fixed Head	08914110	Clevis Head	08914310	.73"-.94" (19 mm-24 mm)	SDR 9 SDR 11 SDR 13.5 SDR 15.5	-	-	-	-
	08914122		08914322	.97"-1.19" (25 mm-30 mm)	-	SDR 9 SDR 11 SDR 13.5 SDR 15.5 SCH 40	-	-	-
	08914130		08914330	1.16"-1.43" (29 mm-36 mm)	-	SDR 21	SDR 7 SDR 9 SDR 11 SDR 13.5	SDR 7	-
	08914142		08914342	1.50"-1.67" (38 mm-42 mm)	-	-	SDR 21	SDR 11 SDR 13.5 SDR 15.5 SDR 17 SCH 40	-
	08914150		08914350	1.72"-1.85" (44 mm-47 mm)	-	-	-	SDR 21	-
	08914162		08914362	1.88"-2.07" (48 mm-53 mm)	-	-	-	-	SDR 11 SDR 13.5 SDR 15.5 SCH 40 SCH 80

Ordering Information

			Innerduct I.D Range		Max OD		Hole Dia.		Slot Width		Slot Depth		Pin Dia.		Pin Center
	Nominal Size		A-B		C		D		E		F		G		H
Part Number	(in)	(mm)	(in)	(mm)	(in)	(mm)	(in)	(mm)	(in)	(mm)	(in)	(mm)	(in)	(mm)	(in)	(mm)
08960712*	1 - 1 1/4	23 - 52	1.06 - 1.43	27 - 37	1.75	44	0.44	11	0.56	14	1.31	33	0.44	11	0.56	14
08960715*	1 1/2	38	1.37 - 1.68	35 - 43	2	51	0.44	11	0.56	14	1.31	33	0.44	11	0.56	14
08960720*	2	51	1.93 - 2.12	49 - 54	2.44	62	0.44	11	0.56	14	1.31	33	0.44	11	0.56	14
*Will fit all Condux Pulling Harnesses