Clevis Head Innerduct Pulling Eye

Name: Clevis Head Innerduct Pulling Eye - Condux International
Availability: InStock

Same tapered threads as the standard innerduct pulling eye, these pulling eyes feature a slotted head with clevis pin to permit direct attachment to any Condux multiple pulling harness leg ends. When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions recommended by the innerduct manufacturers.

NOTE: To determine correct pulling eye size, obtain the actual innerduct inside diameter (I.D.). The I.D. measurement must be greater than dimension A and smaller than dimension B.

Clevis Head Innerduct Pulling Eye Diagram

Innerduct I.D. Range

Clear

Add to quote

Note: Products may be available at a lower price through authorized local distributors. Click here to find a distributor near you.

SKU: N/A Category: Innerduct Pulling Products

Innerduct Compatibility Chart

			Innerduct Eye Part No.	Innerduct I.D. Range	Compatible Innerduct
			Innerduct Eye Part No.	Innerduct I.D. Range	0.75"	1.00"	1.25"	1.50"	2.00"
		Swivel Head	08960712	1.06"-1.43" (27 mm-36 mm)	-	SDR 13.5 SDR 15.5 SDR 17 SDR 21	SDR 7 SDR 9 SDR 11 SDR 13.5	SDR 7	-
			08960715	1.37"-1.68" (35 mm-42 mm)	-	-	SDR 13.5 SDR 15.5 SDR 17 SDR 21	SDR 9 SDR 11 SDR 13.5 SDR 15.5	-
			08960720	1.93"-2.12" (49 mm-54 mm)	-	-	-	-	SDR 13.5 SDR 15.5 SDR 17
Fixed Head	08914110	Clevis Head	08914310	.73"-.94" (19 mm-24 mm)	SDR 9 SDR 11 SDR 13.5 SDR 15.5	-	-	-	-
	08914122		08914322	.97"-1.19" (25 mm-30 mm)	-	SDR 9 SDR 11 SDR 13.5 SDR 15.5 SCH 40	-	-	-
	08914130		08914330	1.16"-1.43" (29 mm-36 mm)	-	SDR 21	SDR 7 SDR 9 SDR 11 SDR 13.5	SDR 7	-
	08914142		08914342	1.50"-1.67" (38 mm-42 mm)	-	-	SDR 21	SDR 11 SDR 13.5 SDR 15.5 SDR 17 SCH 40	-
	08914150		08914350	1.72"-1.85" (44 mm-47 mm)	-	-	-	SDR 21	-
	08914162		08914362	1.88"-2.07" (48 mm-53 mm)	-	-	-	-	SDR 11 SDR 13.5 SDR 15.5 SCH 40 SCH 80

Ordering Information

	Nominal Size	Innerduct I.D. Range	Max O.D.	Hole Dia.	Slot Width	Slot Depth	Pin Dia.	Pin Center
Part Number	(in) (mm)	A - B (in) (mm)	C (in) (mm)	D (in) (mm)	E (in) (mm)	F (in) (mm)	G (in) (mm)	H (in) (mm)
08914310*	.75" (19mm)	.71" - .87" (18-22mm)	1.25" (32mm)	.25 "(6mm)	.56" (14mm)	1.34" (34mm)	.38" (10mm)	.59" (15mm)
08914322*	1.00" (25mm)	.97" - 1.19" (25-30mm)	1.38" (35mm)	.25 "(6mm)	.56" (14mm)	1.34" (34mm)	.44" (11mm)	.56" (14mm)
08914330*	1.25" (32mm)	1.06" - 1.43" (27-37mm)	1.75" (44mm)	.38" (10mm)	.75" (19mm)	1.78" (45mm)	.63" (16mm)	.81" (21mm)
08914342*	1.50" (38mm)	1.50" - 1.67" (38-42mm)	2.00" (51mm)	.38" (10mm)	.75" (19mm)	1.78" (45mm)	.63" (16mm)	.72" (18mm)
08914350*	1.75" (44mm)	1.68" - 1.81" (43-46mm)	2.25" (57mm)	.38" (10mm)	.75" (19mm)	1.78" (45mm)	.63" (16mm)	.72" (18mm)
08914362**	2.00" (51mm)	1.88" - 2.07" (48-53mm)	2.50" (62mm)	.38" (10mm)	.75" (19mm)	2.50" (62mm)	.88" (22mm)	1.23" (31mm)
*Will fit all Condux pulling harnesses
**Will fit the Condux 3/8" and 1/2" cable pulling harnesses