Superior Design & Operation
Adjustable Boom
The APS75 comes equipped with a pivoting arm that lets the user to adjust boom placement 30° in either direction. This allows the APS75 to be aligned for pulling quickly and easily, no matter the jobsite layout.
Hydraulic Tool Circuit
Each unit comes standard with a hydraulic tool circuit to operate additional hydraulic powered tools. The fully enclosed sound attenuated hydraulic power pack offers 40 gpm pump & motor with a 20 gallon filtered reservoir. Seven gpm @ 2000 psi is available for hand tools and pumps.
The Brands You Know
Major engine, hydraulic system and trailer components are from widely popular national suppliers meaning excellent reliability and spare parts availability.
Stability
The APS75 is designed with a low center of gravity, excellent front/rear weight distribution, and numerous adjustable supports for optimum stability for both the road and the job.
Safety
All moving parts are housed safely in enclosures or protected by guards to help improve operator and jobsite safety. The trailer unit also comes standard with electric brakes.
Anti-Twist Rope with Level Wind
Comes standard with 2450 ft. of antitwist rope and built-in reel winder with automatic level wind. Advantages include high flexibility, absolute minimal cable twisting and equal distribution of tension among primary wires. Results in increased pulling efficiency, less duct abrasion and can be spliced in the field.
Informed & In Control
A digital readout allows the operator to view pulling forces, distance pulled, tension limiter and hydraulic pressure readings. Tension limits are setup quickly and easily. The APS75 also comes standard with a wired remote control to provide the operator added safety and convenience. Emergency stop buttons located on the main panel and remote control will stop the pull operations immediately when pressed. Pulling operations can be recorded and downloaded after the pull through a convenient USB port located on the display.
-
Control lever for pull in, neutral and payout
-
Digital tension readout with set point and automatic control of maximum pull with load cut-off.
-
Digital footage counter that reads the footage of pulling rope paying in or paying out.
-
Warning lights
-
Standard USB connection allows users to record and download pulling operations onto a flash drive. Information is downloaded as a .csv file and can be copied onto any computer, then printed, saved and/or emailed.
|
APS75 Specifications |
||
|
Standard |
||
|
Performance |
||
|
Maximum Line Pull (lbs) |
7500 |
|
|
Maximum Speed (fpm) |
175 |
|
|
Engine |
||
|
Engine Type |
Diesel |
|
|
Horsepower |
49 |
|
|
Electrical System |
12 volt |
|
|
Fuel Tank (g) |
18 |
|
|
Bullwheel |
||
|
Dimensions |
8.4 inch dia with 6 grooves |
|
|
Rope Reel w/Built in Level Wind |
||
|
Antitwist Rope |
2450 feet of 3⁄8 inch |
|
|
Hydraulics |
||
|
Tool Circuit |
7 gpm @ 2000 psi |
|
|
Dimensions |
||
|
Width |
94 inches |
|
|
Height |
104 inches |
|
|
Length |
176 inches |
|
|
Weight |
6,100 Pounds (Wet) |
|
|
Air Compressor (not included) |
||
|
Velocity |
185 cfm |
|
|
Compressor Hose |
3⁄4" x 50' |
|
Added Reach & Versatility
The APS75 A-frame extension adds productivity by adjusting quickly to difficult pulling situations. Added reach for pulling extra slack is ideal for manhole applications and challenging job site conditions.
